Elektrik Aktüatörlü Paslanmaz 3 Yollu Vana
Elektrik Aktüatörlü Pirinç Küresel Vanalar
Ex-Proof Bobinli Solenoid Valfler
Genel Maksat Direk Etkili Solenoid Valfler
Genel Maksat Pilot Kumandalı Solenoid Valfler
KOL KUMANDALI KELEBEK VANALAR
Metal Metale hava ayar vanaları, sıcak-soğuk hava hatlarında % 95-98 sızdırmazlık sınıfı ile ayar yapmak için kullanılır.
Özellikler |
VANA ÖLÇÜSÜ | DN 25-DN 600 |
ÇALIŞMA BASINCI | PN 6, PN 10, PN 16 |
FLANŞ BAĞLANTISI | PN 6, PN 10, PN 16 |
KAFA FLANŞI | ISO 5211 |
NORMU | EN 558-1/20 |
GÖVDE | GG 25, GGG 40-50, AISI 316, AISI 304 |
KLEPE | GG 25, GGG 40-50, AISI 316, AISI 304 |
ALT MİL | AISI 304, AISI 316 |
ÜST MİL | AISI 304, AISI 316 |
BURÇ | GG 25 |
SALMASTRA | GRAFİTLİ |
PUL | st-37, A-2 |
CİVATA | 8.8, A-2 |
Kromschröder Burner Control Unit, BCU 370WI1FEU0D1
The BCU (burner control unit) 370 controls, ignites, and monitors industrial forced air burners of unlimited capacity in intermittent or continuous operatio. It can be used for directly ignited forced air burners or forced air burners ignited with a pilot burner. The burner control unit activates the blower and sets the connected solenoid gas valves to the pre-purging and ignition position. After the pre-purge and burner start, an enable signal is sent to an external controller that positions the butterfly valve according to the output demand. Post-purge occurs after the end of the burner operatio. The BCU 370 monitors the gas and air pressure, an integrated tightness control function (optional) checks the valves with an external gas pressure switch.
The quick-start option allows standard-compliant start-up of a forced air burner without pre-purge after normal shutdown. This means unnecessary air won’t get into the combustion chamber. The heat output is available as quickly as possible after a temperature demand.
Kromschroder VAS240R/NW 88018371 Solenoid Valves
Midland-ACS 3550 Serisi
Midland-ACS 3550 Serisi
Pnömatik Aktüatörlü Paslanmaz 3 Yollu Vana
Pnömatik Aktüatörlü Paslanmaz Flanşlı Küresel Vana 3P
Pnömatik Aktüatörlü Paslanmaz Küresel Vana
Pnömatik Aktüatörlü Paslanmaz Wafer Küresel Vana
ROTORK CK
CK Standart Aktüatörler
Elektrik motoru, tahrik dişlisi, bağımsız el çarkı, tork ve konum limiti kontrolü ve fiş ve soket saha kablo bağlantısı ile göstergeden oluşur. CK serisi, merkezi motor kontrol merkezlerine sahip kullanıcılar veya yüksek sıcaklık ve sürekli titreşim uygulamaları için doğru çözümü sunar.
CK - Standart izolasyon görev aktüatörü
CK R - Standart modülasyon görev aktüatörü
SMC AR25-F02-A Regulator
Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment.
- Internal pilot relieving style (pilot air is always bleeding)
- Port sizes ranging from 1/4 to 2
- Optional bracket and pressure gauge
SMC AR30-F03E Regulator
Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment.
- Modular type regulator
- Optional embedded pressure gauge
- Available with built-in backflow mechanism
- Knob is made of ozone resistant rubber material (HNBR)
- Improved relief sensitivity
- 6 Sizes
- Rc, NPT or G(PF) threads
SMC ARX20-F02B Regulator
Series ARX20, piston type regulator, is compatible with a primary supply pressure of 2.0MPa and is ideal for pressure adjustment of air blowing applications. The ARX has a compact design with a width of 35mm and an overall length of 80mm. The piston operated design ensures long operating life. The ARX has an easy-to-operate adjustment handle.
SMC AW20-F02 FILTER/REGULATOR- AW SERIES
FILTER/REGULATOR- AW SERIES
SMC AW Series Filter Regulators take up less space and require fewer piping, thereby reducing installation costs. AW filter regulators are made of rugged materials designed to withstand high pressures and allow the user to use a wide range of set pressure.
Filter size 5 μm
Output set pressure range: 0.5 → 8.5 bar ( 487-1070 0 → 7 bar)
Maximum operating pressure 10 bar
SMC C85N16-60 ROUND BODY CYLINDER
The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable nose seals, the C85 offers exceptional service life.
SMC CD55B32-80M-X1439 COMPACT CYLINDER
C55 double acting, air operated cylinders were designed to meet a broad range of automation machine applications. The C55 series achieves outstanding load performance due to its unique rubber bumpers, piston wear ring, and rod bushing. Standardized mounting options conform to both ISO 21287 and 6431.
- Construction is similar to the current CQ2 lateral load resistant specification
- Snap ring construction allows easy and quicker maintenance
- Auto switches can be mounted on any of the four sides of the cylinder tube
SMC CDJ2D10-30Z-B ROUND BODY CYLINDER
Series CJ2 miniature cylinders available in spring return, spring extend, or double acting offer stainless steel tubing and stainless steel rods. The series is available in bore sizes 6, 10, 16mm and stroke lengths from 1/2in. to 8in.. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable
- Standard double acting single rod
- Bore sizes: 6, 10, 16 *
- Strokes from 15mm through 200mm depending upon bore size
- Mounts: basic, foot, front flange, double clevis
- Variety of switches and a variety of lead wire lengths
SMC CJ2D16-15Z ROUND BODY CYLINDER
Series CJ2 miniature cylinders available in spring return, spring extend, or double acting offer stainless steel tubing and stainless steel rods. The series is available in bore sizes 6, 10, 16mm and stroke lengths from 1/2in. to 8in.. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable
- Strokes from 15mm through 200mm depending upon bore size
- Mounts: basic, foot, front flange, double clevis
- Variety of switches and a variety of lead wire lengths
SMC CP96SDB63-50C PISTON
CP96, profile design ISO cylinder with closed tie rods, available in 6 hole sizes from 32 to 125 mm. High precision caps and tie rod nuts improve assembly accuracy and extend cylinder life. Increasing the precision of the bushing and piston rod and reducing the tolerances reduced the deflection of the piston rod. Standard strokes range from 25 to 800 mm.
SMC CRA1BS30-90Z Rotary Actuator
The CRA1 rack & pinion rotary actuator offers very high torque-to-size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto-switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9.65" X 4.41". Single shaft end or double shaft end models are available.
- Standard type rotary actuator
- 3 mounting types available
- Single or double rod end available
- Bores sizes: 50mm ~ 100mm
- Auto switch capable
SMC CXSM20-40 GUIDED CYLINDER
Series CXS is available in six bore sizes and stroke lengths up to 100mm. This series is very compact and has a very accurate non-rotating specification. It is suited for accurate pick-and-place applications or light duty material handling. The CXS can be used with either reed or solid state switches. Available in clean room versions.
- Dual rod cylinder with slide bearing
- Bore sizes: 6, 10, 15, 20, 25, 32 *
- Strokes from 10mm through 100mm depending upon bore size
- Variety of switches and a variety of lead wire lengths
SMC EVZM550
SMC IR2020-F02 Regulator
SMC MGPM16-15 COMPACT GUIDE CYLINDER
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.
SMC MGPM25TF-202 COMPACT GUIDE CYLINDER
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder's load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series.
- Compact guide cylinder, slide bushing, new sytyle
- Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm)
- Strokes: 10mm through 400mm, depending upon bore size
- Variety of switches with a variety of lead wire lengths
SMC SY3440-5HSD-Q VALFE
SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.
SMC SY7120-5DZ-02F-Q SOL/VALVE
Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.
- Fluid: air
- Operating pressure range: (internal pilot) 0.1 - 0.7MPa (external pilot) -100kPa to 0.7MPa (external pilot, pilot pressure range) 0.25 - 0.7MPa
- Effective area mm 2 (Cv): body ported 10.6 (0.59); base mounted 12.6 (0.7)
- Coil rated voltage: 3, 5, 6, 12, 24VDC; 100, 110, 200, 220VAC
- Response time (0.5MPa) w/o indicator light andamp; surge voltage suppressor: 32ms or less
- Ambient andamp; fluid temperature: 50 C
SMC SY9120-5YO-02F-Q RUBBER SEAL
Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.
- Coil rated voltage: 3, 5, 6, 12, 24VDC; 100, 110, 200, 220VAC
- Response time (0.5MPa) w/o indicator light andamp; surge voltage suppressor: 32ms or less
- Ambient andamp; fluid temperature: 50 C