PILZ PNOZ s5 C 24VDC 2 n/o 2 n/o t ZAMAN İZLEME
PNOZsigma safety relay (independent), inputs: 1/2-channel wiring connection with/without short-circuit detection between contacts, manual/automatic operation, outputs: 2 N/O, 2 N/O td (t = 0.04-300 sec) , 1 SC, UB = 24 V DC, width: 22.5 mm, snap-on spring terminals, E-STOP monitoring, safety gates, light curtain.
| Supply voltage (V) | 24V |
| U1 supply voltage type | DC |
| power consumption DC | 4W |
PILZ PNOZ s50 C FREN KONTRÖLÜ
PNOZsigma brake control and monitoring device, safe braking conforming to PL e and SIL 3, UB = 24 V DC, 2x 5 A, use of push and turn display, snap-on spring terminals, safe control of inductive loads (e.g. valves, mechanical holding brakes) .
| U1's purpose | System supply |
| Supply voltage (V) | 24V |
| U1 supply voltage type | DC |
| power consumption DC | 18W |
| Device circuit breaker U1 | 4 A, Auto. 24 VDC, Kar.B/C |
| U1 potential isolation | No |
| U2's purpose | 2pole SC outputs supply. |
| Supply voltage 2 (V) | 24 - 48V |
| U2 supply voltage type | DC |
| U2 tolerance | -10%/+20% |
| U2 potential isolation | Yes |
PILZ PNOZ s6 24VDC 3 n/o 1 n/c ÇİFT-EL İZLEME
PNOZsigma safety relay (independent), inputs: 2-channel wiring, wiring, 1 N/O per button, 1 N/C, outputs: 3 N/O, 1 N/C, 1 SC, UB24V DC, width: 22.5 mm, plug-in screw terminals, two-hand control relay simultaneous monitoring with two-hand pushbutton.
| Supply voltage (V) | 24 V |
| U1 supply voltage type | DC |
| power consumption DC | 3.5 watts |
| Max. device circuit breaker | Max. conductor cross section |
| Two-handed device type standard | EN574 |
