Name: SIKO MSK2000-0049 Magnetic sensor
SKU: 8668
Price: 1.00 TRY
Availability: InStock

SIKO MSK2000-0049 Magnetic sensor

Mechanical data

Feature	Technical data	Additional information
Housing	light green plastic
Sensor/band reading distance	1 … 10 mm
Cable sheath	PUR, suitable for drag-chain use	4-wire ø4.4_-0.4 mm; 6, 8-wire ø5_-0.4 mm
Cable bending radius	5x cable diameter	static
	7.5x cable diameter	dynamic
Service life of cable	>5 million cycles	under the following test conditions: Travel range 4.5 m Travel speed 3 m/s Acceleration 5 m/s² Ambient temperature 20 °C ±5 °C

Electrical data

Feature	Technical data	Additional information
Operating voltage	10 … 30 V DC	reverse polarity protected
	5 V DC ±5 %	no reverse polarity protection
Current consumption	<50 mA	PP, unloaded
	<25 mA	LD
Output circuit	PP, LD (RS422)
Output signals	A, A/, B, B/, I, I/	90° off-phase
Output signal level high	UB – 2.5 V	PP
	RS422 specific	LD
Output signal level low	<0.8 V	PP
	RS422 specific	LD
Latency	1.5 µs
Pulse width of reference signal	1 increment(s)
Real-time requirement	speed-proportional signal output
Type of connection	open cable end
	plug connector	7/8-pole

Signal patterns

The logical condition of signals A and B is not defined in reference to the index signal I or the reference signal R. It can deviate from the signal form.

System data

Feature	Technical data	Additional information
Resolution	0.25, 1 mm
System accuracy	±(1 + 0.03 x L) mm, L in m	at T_U = 20 °C
Repeat accuracy	±1 increment(s)
Measuring range	∞
Travel speed	≤25 m/s

Ambient conditions

Feature	Technical data	Additional information
Ambient temperature	-10 … 70 °C
Storage temperature	-30 … 80 °C
Relative humidity	100 %	condensation admissible
EMC	EN 61000-6-2	interference resistance / immission
	EN 61000-6-4	emitted interference / emission
Protection category	IP67	EN 60529
Shock resistance	500 m/s², 11 ms	EN 60068-2-27
Vibration resistance	100 m/s², 5 … 150 Hz	EN 60068-2-6