Gösterilen sonuç sayısı: 7

ORDEL OC770 Zamanlamalı Kontrol Cihazı 100-240V AC/DC

2 x 4 Digit Numeric Displays 4 LED Indicators 1 Universal Sensor Input (TC, RT) 1 Piece RS485 Communication Unit 1 Analog Switch (0 / 4-20mA, 0 / 2-10V) 3 Relays or Logic Outputs (24V) 100-240Vac Universal Or 24Vac / dc Supply Isolation Between Input / Output Modules PID Heating / Cooling Auto-Tuning (auto tuning of PID) Censor Troubleshooting Start Stop with Signal Input Ramp Function 2 Working Modes Retransmission (Process and Settings Set) 17 Different Relay Functions ON/OFF, PID Control 3 Steps Can Be Defined Linear and Time-Proportional Control Output Seamless Transfer Feature 100ms Sampling and Control Cycle Standard MODBUS RTU Communication Protocol Configuration via Computer

ORDEL PC44-PC77-PC99 Standart Tip Adım Kontrol Cihazları

PC44 model cihazlar 48x48mm ebatlarında basit 10 adıma kadar çalıştırılmak istenen sistemler için tasarlanmış cihazlardır. Bu cihazın 1 adet üniversal girişi, 1 adet analog çıkışı, 3 adet röle çıkışı ve 1 adet RS485 iletişim modülü bulunmaktadır. Bu sayede birçok prosesde tercih edilen cihazlardır. PC77 model cihazlar 72x72mm ebatlarında basit 10 adıma kadar çalıştırılmak istenen sistemler için tasarlanmış cihazlardır. Bu cihazın 1 adet üniversal girişi, 1 adet analog çıkışı, 3 adet röle çıkışı ve 1 adet RS485 iletişim modülü bulunmaktadır. Bu sayede birçok prosesde tercih edilen cihazlardır PC99 model cihazlar 99x99mm ebatlarında basit 10 adıma kadar çalıştırılmak istenen sistemler için tasarlanmış cihazlardır. Bu cihazın 1 adet üniversal girişi, 1 adet analog çıkışı, 4 adet röle çıkışı ve 1 adet RS485 iletişim modülü bulunmaktadır. Bu sayede birçok prosesde tercih edilen cihazlardır

ORDEL PC771 Gelişmiş Adım Kontrol Cihazı

Model PC771 instruments are fully modular and each module is independently configurable, designed for the measurement and control of many process variables in industrial environments. In the design phase, compliance with international standards, reliability and ease of use are taken as basis. For this reason, they are ergonomic devices that can be used for very different controls in many sectors

ORDEL PC991 GELİŞMİŞ ADIM KONTROL CİHAZI

Model PC991 devices are completely modular and each module can be configured independently, designed for the measurement and control of many process variables in industrial environments. In the design phase, compliance with international standards, reliability and ease of use are based. For this reason, they are ergonomic devices that can be used for very different controls in many sectors

ORDEL PI440 PROSES GÖSTERGESİ

PI series devices are display devices used for displaying process variables. Some General Features Accuracy: +/- 0.2% Sampling Time: 100ms Ambient Temperature: -10.+55°C Protection Class: IP20

ORDEL PI770 Programlanabilir Proses Göstergesi

PI770 model devices are completely modular and each module can be configured independently, designed for the measurement of many process variables in industrial environments and for transmitting the measured values ​​to other units. Compliance with international standards, reliability and ease of use were taken during the design phase. For this reason, they are ergonomic devices that can be used easily for very different controls in many sectors.

ORDEL PI990 PROSES GÖSTERGESİ

The screen of the software used to connect the device, such as PI990 model designs, design tools for the screen rendering process, and modulators and modular features to configure the screen configuration. In Tasarim, international accommodation has been facilitated by the ease of preparation and use. This is not the case with Different Controls for Usable Ergonomics.